Products
  • BPS252012S-TB6/TB7/TB8
BPS252012S-TB6/TB7/TB8

Inductance functionKeysight Technologies LCRMeasuring instrument4285AMeasured. The same measurement equipment can be used for the same measurement. The test frequency is1MHz,OSC LEVEL:0.5V. Can be customized according to individual specifications.

Product parameter

Part Number L
(uH) 		Tolerance Rdc（mΩ）
Max.[Typ.] 		Isat（A）
Max.[Typ.] 		Itemp（A）
Max.[Typ.]
BPS252012S-R24M-TB6 0.24 ±20％ 19 [16] 8.5 [9.0] 5.6 [6.4]
BPS252012S-R24M-TB8 0.24 ±20％ 12 [10] 9.5 [10] 6.4 [7.0]
BPS252012S-R33M-TB6 0.33 ±20％ 19 [16] 6.6 [7.5] 5.6 [6.4]
BPS252012S-R33M-TB8 0.33 ±20％ 12 [10] 7.5 [8.0] 6.4 [7.0]
BPS252012S-R47M-TB6 0.47 ±20％ 24 [21] 5.7 [6.5] 4.2 [4.7]
BPS252012S-R47M-TB7 0.47 ±20％ 18 [15] 6.2 [6.8] 5.6 [6.4]
BPS252012S-R47M-TB8 0.47 ±20％ 13 [11] 6.8 [7.4] 6.0 [6.7]
BPS252012S-R68M-TB6 0.68 ±20％ 30 [23] 4.6 [5.3] 4.0 [4.5]
BPS252012S-R68M-TB8 0.68 ±20％ 19 [15] 6.0 [6.4] 5.6 [6.1]
BPS252012S-R82M-TB8 0.82 ±20％ 26 [22] 5.5 [6.0] 5.0 [5.5]
BPS252012S-1R0M-TB6 1.0 ±20％ 36 [32] 4.3 [4.8] 3.6 [4.1]
BPS252012S-1R0M-TB8 1.0 ±20％ 28 [25] 5.3 [5.8] 5.2 [5.7]
BPS252012S-1R5M-TB6 1.5 ±20％ 53 [46] 3.6 [4.2] 3.4 [3.7]
BPS252012S-1R5M-TB8 1.5 ±20％ 44 [40] 4.2 [4.8] 4.5 [5.0]
BPS252012S-2R2M-TB6 2.2 ±20％ 84 [70] 3.0 [3.5] 2.4 [2.7]
BPS252012S-2R2M-TB8 2.2 ±20％ 60 [50] 3.3 [4.0] 3.3 [3.7]
BPS252012S-3R3M-TB6 3.3 ±20％ 120 [100] 2.2 [2.5] 1.7 [2.0]
BPS252012S-3R3M-TB8 3.3 ±20％ 97 [80] 2.7 [3.0] 2.5 [2.8]
BPS252012S-4R7M-TB6 4.7 ±20％ 167 [144] 2.0 [2.4] 1.6 [1.8]
BPS252012S-4R7M-TB8 4.7 ±20％ 128 [110] 2.1 [2.6] 2.0 [2.5]
BPS252012S-6R8M-TB6 6.8 ±20％ 269 [234] 1.5 [1.9] 1.4 [1.6]
BPS252012S-6R8M-TB8 6.8 ±20％ 245 [210] 1.9 [2.2] 1.6 [2.0]
BPS252012S-100M-TB6 10.0 ±20％ 360 [310] 1.5 [1.7] 1.2 [1.4]
BPS252012S-100M-TB8 10.0 ±20％ 350 [310] 1.5 [1.7] 1.3 [1.5]

•Can be customized according to individual specifications.

•Isat: Inductance decreases approximately from the actual initial value30%The DC current.

•Itemp: The temperature rises aboutΔT=40°CWhen the direct current.Depending on the circumstances of our use,ItempIs a reference value.In the final application, the circuit should be designed so that the temperature rise of the component does not exceed40℃.