| Part Number |
L (uH)±20% |
Rdc(mΩ) | Isat(A) | Itemp(A) |
SIZE L*W*H (mm)Max |
|||
| Max. | Typ. | Max. | Typ. | Max. | Typ. | |||
|
JSHC0530H-R68M-K |
0.68 | 12 | 10.8 | 9.9 | 11.0 | 8.1 | 9.0 |
|
|
JSHC0530H-1R0M-K |
1.0 | 16 | 14.4 | 9.0 | 10.0 | 6.3 | 7.0 | |
|
JSHC0530H-1R5M-K |
1.5 | 22 | 19.8 | 8.1 | 9.0 | 4.5 | 5.0 | |
|
JSHC0530H-2R2M-K |
2.2 | 35 | 31.5 | 6.75 | 7.5 | 4.95 | 5.5 | |
| JSHC0530H-3R3M-K | 3.3 | 38 | 34.2 | 6.3 | 7.0 | 3.6 | 4.0 | |
|
JSHC0530H-4R7M-K |
4.7 | 60 | 54 | 4.5 | 5.0 | 3.15 | 3.5 | |
|
JSHC0530H-6R8M-K |
6.8 | 90 | 81 | 3.2 | 3.5 | 2.25 | 2.5 | |
|
JSHC0530H-100M-K |
10 | 133 | 119.7 | 2.3 | 2.5 | 1.8 | 2.0 | |
|
JSHC0530H-150M-K |
15 | 190 | 171 | 2.34 | 2.6 | 1.89 | 2.1 | |
|
JSHC0530H-220M-K |
22 | 250 | 225 | 1.35 | 1.5 | 1.08 | 1.2 | |
| JSHC0530H-R33M-GH | 0.33 | 5.5 | 4.95 | 20.25 | 22.5 | 11.7 | 13.0 | |
| JSHC0530H-R47M-GH | 0.47 | 8.5 | 7.65 | 10.8 | 12.0 | 11.7 | 13.0 | |
| JSHC0530H-R68M-GH | 0.68 | 8.0 | 7.20 | 16.2 | 18.0 | 12.6 | 14.0 | |
| JSHC0530H-1R0M-GH | 1.0 | 12.65 | 11.39 | 10.8 | 12.0 | 8.1 | 9.0 | |
|
JSHC0503H-1R5M-GH |
1.5 | 25 | 22.5 | 9.0 | 10.0 | 5.4 | 6.0 | |
|
JSHC0503H-2R2M-GH |
2.2 | 35 | 31.5 | 9.0 | 10.0 | 5.22 | 5.8 | |
|
JSHC0503H-3R3M-GH |
3.3 | 38 | 34.2 | 7.2 | 8.0 | 3.15 | 3.5 | |
|
JSHC0503H-4R7M-GH |
4.7 | 60 | 54.0 | 4.5 | 5.0 | 3.6 | 4.0 | |
|
JSHC0503H-6R8M-GH |
6.8 | 90 | 81.0 | 3.15 | 3.5 | 2.25 | 2.5 | |
| JSHC0503H-100M-GH | 10 | 126 | 113.4 | 2.7 | 3.0 | 1.8 | 2.0 | |
|
JSHC0503H-150M-GH |
15 | 165 | 148.5 | 1.8 | 2.0 | 1.35 | 1.5 | |
•Can be customized according to individual specifications.-
•The test frequency is1MHz,OSC LEVEL:0.5V.
•Inductance functionKeysight Technologies LCRMeasuring instrument4285AMeasured. The same measurement equipment can be used for the same measurement.
•Inductance value: The inductance value decreases approximately from the actual initial value30%When the direct current.
•Isat: Inductance decreases approximately from the actual initial value30%The DC current.
•Itemp: The temperature rises aboutΔT=40°CWhen the direct current.
•Depending on the circumstances of our use,ItempIs a reference value.
•In the final application, the circuit should be designed so that the temperature rise of the component does not exceed40℃.
